-Implemented WiFi connectivity
-Implemented new system management with high performance and high screen refresh rate
-Further elevated GPS accuracy
-Enabled Bluetooth connectivity
-Fixed possible glitched screen that could happen sometimes when booting
-Improved management of some motorcycle models
-Updated Tracks Library
-Faster menu scrolling
-Improved GPS reception
-Updated configuration of motorcycle models
-General Optimizations

-Modified connection management for WID modules.
-Implemented WiFi connectivity for Corsaro produced in 2021 with serial number having the number 3 in the seventh position (e.g. CXXXXX3XXXXXXXXX-XXXX).
-Activated automatic Track Library synchronization from MAAT.
-RPMS feature optimizations.
-PEAKS feature optimizations.
-New evolution for the Predictive Laptiming function.
-Implemented new predictive laptiming feature.
-Implemented new feature that switches on the unit automatically when WID-D module gets engine RPM signals.
-Optimized the internal battery charge indication.
-Fixed possible TPS calibration issue on WID-D modules.
-Optimized firmware update feature for WID-D modules.
-General optimizations.
-Activated the Inertial Pack for Lean Angle and Longitudinal and Lateral accelerations.
-Implemented vehicle battery voltage acquisition.
-Graphic optimizations in menus.
-General optimizations.
-Implemented new WID-D module management.
-Track list updated.
-General optimizations.
-Activated library with more than 200 tracks with finsh line and intermediates, divided for cathegory and country, which Corsaro will find out automatically but you can also select them manually.
-Introduced new screens for kart abd scooter.
-Implemented new Open Circuit and Performance Test features for hill climbing, rally and acceleration races.
-The Freeze Peaks feature, which freezes the peak values when passing on the finish line, can be now enabled in the Options menu.
-Introduced Channel Monitor.
-Improved RPM signal filtering.
-Improved wheel speed signal on WID-A modules.
-Introduced compatibility for WID-B and C modules for: Aprilia RSV-4 APRC, BMW S1000RR, Ducati Panigale, Kawasaki ZX10 2011-2015 and 2016, Yamaha R1 2015.
-General optimizations.-Added main battery status and WID-A battery status to the access screen.
-Reduced time to first fix for satellites at startup.
-Improved GPS trajectories precision.
-Optimizations in WID-A connection.
-General optimizations.
-Implemented the minimum and maximum Exhaust Temperature and maximum RPM indication when passing the finish line.
-Implemented Exhaust Temperature alarm.
-Fixed possible issue in local time setting.
-Optimizations for WID-C modules management.
-Implemented display minimum and maximum peaks visualization at the end of session.
-Introduced user notification function: low voltage for main battery and WID modules or other system alerts.
-Introduced new feature SGB (Starlane GPS Booster).
-Implemented display of the Active Circuit on the access screen with quick access to the Track selection.
-Implemented manual recording function.
-Implemented water temperature alarm function.
-Introduced selection of user specialty to set the default profile with the best performance for Kart / Scooters, Car / Motorbike or Nautical.
-Implemented management of WID-B and WID-C wireless modules which will be released soon.
-Implemented device rename function.
-Refined touch sensitivity of the touch screen.
-Fixed possible issue in Hour Meters.
-General improvements.
-Fixed last session display in Analysis Menu.
-New faster firmware update process.
-General improvements.
-Optimized water temperature and RPM reading for different 2 and 4 stroke engines.
-Implemented new automatic firmware update for WID-A modules.
-General improvements.

-Modified connection management for WID modules.
-Implemented WiFi connectivity for Corsaro produced in 2021 with serial number having the number 3 in the seventh position (e.g. CXXXXX3XXXXXXXXX-XXXX).
-Activated automatic Track Library synchronization from MAAT.
-RPMS feature optimizations.
-PEAKS feature optimizations.
-New evolution for the Predictive Laptiming function.
-Implemented new predictive laptiming feature.
-Implemented new feature that switches on the unit automatically when WID-D module gets engine RPM signals.
-Optimized the internal battery charge indication.
-Fixed possible TPS calibration issue on WID-D modules.
-Optimized firmware update feature for WID-D modules.
-General optimizations.
-Activated the optional Inertial Pack management for Lean Angle and Longitudinal and Lateral accelerations.
-Implemented vehicle battery voltage acquisition.
-Graphic optimizations in menus.
-General optimizations.
-Implemented new WID-D module management.
-Track list updated.
-General optimizations.
-Introduced Multilanguage menu: Italian, English, German, French, Spanish.
-Implemented new screen with RPM bar.
-Track list updated.
-Activated library with more than 200 tracks with finsh line and intermediates, divided for cathegory and country, which Corsaro will find out automatically but you can also select them manually.
-Introduced new screens for kart abd scooter.
-Implemented new Open Circuit and Performance Test features for hill climbing, rally and acceleration races.
-The Freeze Peaks feature, which freezes the peak values when passing on the finish line, can be now enabled in the Options menu.
-Introduced Discoverability feature: to pair Corsaro with PC activate the Discoverability in Corsaro Bluetooth menu.
-Introduced Channel Monitor.
-Improved RPM signal filtering.
-Improved wheel speed signal on WID-A modules.
-Introduced compatibility for WID-B and C modules for: Aprilia RSV-4 APRC, BMW S1000RR, Ducati Panigale, Kawasaki ZX10 2011-2015 and 2016, Yamaha R1 2015.
-General optimizations.-Added main battery status and WID-A battery status to the access screen.
-Reduced time to first fix for satellites at startup.
-Improved GPS trajectories precision.
-Optimizations in WID-A connection.
-General optimizations.
-Implemented the minimum and maximum Exhaust Temperature and maximum RPM indication when passing the finish line.
-Implemented Exhaust Temperature alarm.
-Fixed possible issue in local time setting.
-Optimizations for WID-C modules management.
-Implemented display minimum and maximum peaks visualization at the end of session.
-Introduced user notification function: low voltage for main battery and WID modules or other system alerts.
-Introduced new feature SGB (Starlane GPS Booster).
-Implemented display of the Active Circuit on the access screen with quick access to the Track selection.
-Implemented manual recording function.
-Implemented water temperature alarm function.
-Introduced selection of user specialty to set the default profile with the best performance for Kart / Scooters, Car / Motorbike or Nautical.
-Implemented management of WID-B and WID-C wireless modules which will be released soon.
-Implemented device rename function.
-Refined touch sensitivity of the touch screen.
-Fixed possible issue in Hour Meters.
-General improvements.
-Bluetooth connection optimizations.
-Updated engaged gear management and TPS calibration.
-Added LED feedback for manual lap triggers input.
-Fixed last session display in Analysis Menu.
-New faster firmware update process.
-Optimized water temperature and RPM reading for different 2 and 4 stroke engines.
-Implemented new automatic firmware update for WID-A modules.
-General improvements.
-Touch screen optimization.
-Activated SAFD-2 feature.
-Implemented power and backlight management.
-General improvements.

-Optimized WiFi connectivity
-Updated Track Library
-Implemented WiFi connectivity
-Optimized WID modules management
-Fixed possible data download problem with some Android devices
-General optimizations

-Optimized WiFi connectivity
-Updated Track Library
-Implemented WiFi connectivity
-Optimized WID modules management
-Fixed possible data download problem with some Android devices
-General optimizations

-Implemented the new customizable screens feature.
-Minor fixes.
-General optimizations.

-Fixed possible laptime issue after Inertial Pack activation.

-Activated the optional Inertial Pack management for Lean Angle and Longitudinal and Lateral accelerations.

-General improvements.

-Optimizations in RID modules management.

-Fix in device rename feature.

-General improvements.

-Important update with fixes and general improvements.

-Introduced new RID-LAMBDA module management.

-New feature SAFD-2 with the revolutionary automatic intermediates detection.

THE SAFD-2 FUNCTION CAN BE ACTIVATED BY PRESSING FOR 2 SECS. THE "UP ARROW" BUTTON ON THE MAIN SCREEN OR FROM THE SAFD-2 COMMAND IN THE "GPS" MENU.

THE SAFD-2 MUST BE STARTED FROM THE PIT LANE AND, AFTER 2 LAPS, WILL AUTOMATICALLY PLACE FINISH LINE AND INTERMEDIATES IN CONVENIENT PLACES OF THE TRACK WITHOUT ANY INTERVENTION OF THE DRIVER.

-Introduced the new S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm)feature: a new laptiming algorithm allowing very hi laptiming precision also in conditions of not good data on the official GPS signal.-Fixed possible issue in device renaming.

-Extended range setting for analog calibrations on RID modules.

-Freeze time now can be set up to 90 sec.
-General improvements and fixes in RID modules management

-Updated support for RID Kart expansion module
-General improvements in RID modules settings

-Introduced support for RID Moto and RID Analog-3 expansion modules.

-New GPS management by now working at 10Hz instead of 5.

-Amplified GPS reception
-Improvements in USB pendrive managemet

-Introduced the new S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm)feature:
a new laptiming algorithm allowing very hi laptiming precision also in conditions of not good data on the official GPS signal.

-Minor enhancements in session storage and in Best Lap Number reference.

-Introduced the innovative feature SAFD (Starlane Automatic Finish line Detection) developed by Starlane to allow the automatic finish line positioning on the main straight without any operation by the driver, also on unknown tracks. The SAFD feature is accessible in the menu: GPS>FINISH LINE DETECT.

-Modified intermediates visualization on the run: is now displayed the gain/loss in comparison with the personal best performance in the same track point during the current session.

-Introduced the run lap number and best lap time visualization while passing on finish line or intermediate triggers.

-Introduced the LIST NEAR TRACKS feature, accessible in the GPS menu, which allows to be advised when you are near one of the tracks available in the track list and loads the coordinates just by pushing the confirmation key.

-General improvements.

-Introduced new RID-LAMBDA module management.

-New feature SAFD-2 with the revolutionary automatic intermediates detection.

THE SAFD-2 FUNCTION CAN BE ACTIVATED FROM THE SAFD-2 COMMAND IN THE "GPS" MENU.

THE SAFD-2 MUST BE STARTED FROM THE PIT LANE AND, AFTER 2 LAPS, WILL AUTOMATICALLY PLACE FINISH LINE AND INTERMEDIATES IN CONVENIENT PLACES OF THE TRACK WITHOUT ANY INTERVENTION OF THE DRIVER.

-Introduced the new S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm)feature:
a new laptiming algorithm allowing very hi laptiming precision also in conditions of not good data on the official GPS signal.

-Added RID Analog-3 optional module support.

-Introduced maximum session values report by pressing UP Arrow button.
-Fixed possible parameter lost after Gear Learning.

-Introduced the new S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm) feature:a new laptiming algorithm allowing very hi laptiming precision also in conditions of not good data on the official GPS signal.

-Fix for possible gear recognition issue on Honda CBR bikes.

-Introduced the innovative feature SAFD (Starlane Automatic Finish line Detection) developed by Starlane to allow the automatic finish line positioning on the main straight without any operation by the driver, also on unknown tracks. The SAFD feature is accessible in the menu: GPS>FINISH LINE DETECT.

-Modified intermediates visualization on the run: is now displayed the gain/loss in comparison with the personal best performance in the same track point during the current session.

-Introduced the run lap number and best lap time visualization while passing on finish line or intermediate triggers.

-Introduced the LIST NEAR TRACKS feature, accessible in the GPS menu, which allows to be advised when you are near one of the tracks available in the track list and loads the coordinates just by pushing the confirmation key.

-Thermocouple display and alarm implementation on PRO version.
-Generic system optimizations.

- Management of the archive with the coordinates of the finish lines of the main world tracks loaded in
    DigiRace-LE
-The Management of customised finish lines added with the possibility of entering the coordinates acquired from
    Google Earth.
- Possibility of importing, renaming and customising the list of tracks on Athon GPS-R and RW devices.
- Filter intended to automatically remove non-valid sessions, the duration of which is less than 1 minute added.
- Possibility of deleting sessions already downloaded on a computer.
- Indication of frequency and ratio measured while learning the gear on Athon GPS-RW and PRO.

-Stronger and powerful TACHO noise filter for a smoother RPM signal.

-Minor fixes and improvements for all DaVinci versions.
-Introduced customizable CAN BUS for DaVinci-R.

-Introduced RID-Lambda and RID-Analog3 modules management.

-Fixed possible issue in water temperature setting menu.
-General optimizations.

-Updated version to be used with latest releases of DigiRace-MMX 2.0 (2.00.0055 onward).

-Introduced the new S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm)feature: a new laptiming algorithm allowing very hi laptiming precision also in conditions of not good data on the official GPS signal.

-General important optimizations for all DaVinci versions

-Added new features for DaVinci-R dashboards
-General optimizations for all DaVinci versions
-Activated LED dimmer function.
-Fixes in wheel pulse automatic acquisition and data download.